Lw-measurements KHR 502 User Manual download pdf (Page 16)

3.4 Assembling your weighing machine

The weighing machine is delivered in partly dismantled condition. Assemble

the individual components in the following sequence:

 Place your machine on a level, stable, clean, dry surface to obtain

accurate readings.

 Place the plastic platter on top of the scale, flat side facing up so

the platter sits firmly on the machine with the four “legs” inserted

into the corresponding four recepticals.

 Place the stainless steel platter on top of the plastic platter with

the flat side facing up.

 Unwrap and place the clear plastic bowl, open side facing up, on

top of the stainless platter.

3.5 Installing batteries / Connecting the AC adapter

Remove the battery compartment cover and insert six (6) AA batteries (not

included) into the battery compartment, taking extreme care that the polarities

(+ / -) are observed.

 Insert the power adapter cable plug into the socket on the side of the

machine

NOTE: the AC input requirement could be 110, 120, 220, 230 or

240 Volts (50/60 Hz) depending on the area where used, so

please verify that the adapter is correct.

3.6 Choice of a suitable location

The environment in which your weighing machine is used is very important. Air

movement, temperature changes, vibrations, direct sunlight, etc. all influence

the performance of high precision weighing machines. Therefore, place your

weighing machine on a solid, sturdy surface that is free of air currents,

vibration and not in direct sunlight. The surface should not be magnetic and

should be located away from doors, windows, heaters, air conditioners and

fans.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Lw-measurements KHR 502 User Manual Page 16